B5N2 "Kate"
Hasegawa 1/48
This is my 1st commission build.  My customer had seen a Kate on the Hyperscale site beautifully built by Bruce Salmon a few years ago.  What made it interesting was the color scheme.  This has been reproduced with some slight artistic license taken with the aircraft number.
Some wire was added to the cockpit walls to make them look busy.
The throttle levers were given knobs using CA glue using the method described in "Add 3D to PE", about 1/3 down on the Tools & Tips page.
The landing gear has brake lines made of solder with machined brass nuts from Scale Hardware for the fitting.
The box on the torpedo props was fashioned from 1/32" plywood.